The clutch of the automatic capping machine prevents damage to the cap and reduces the wear of the inner stopper. Once the cap is tightened, the capping head automatically stops rotating, indicating that you are ready to move on to the next cap. If you also purchase the holder, the cap can be screwed up easily and neatly. This series of machine can effectively reduce the labor intensity and ensure the capping quality.

I. Basic parameters of automatic capping machine.

　　1、Check before use: After the machine is installed, turn on the power, test run the three-phase motor to ensure the correct running direction, ensure the pressure and flow of compressed air, check all motors, bearings, etc. Lubricating oil is required, and oil-free operation is strictly prohibited. Only after normal operation can you start the machine. At the same time, observe whether the fasteners of all parts are loose. Only when all parts are running stable, the machine can be used normally.

　　2、Check whether the function of safety facilities is normal.

　　3、Before starting the machine, carefully check if there is water in all water tanks, if the chain plate is stuck, if there is debris on the conveyor belt, if there are bottle caps in the cover box, if there are several buckets of water, power supply and air source. After you press and prepare each kick, turn on the main power, the power indicator light is on, the fault indicator light and emergency stop indicator light are not on, then the starting condition is satisfied. Press the start button on the control box and the start switch in the fill position. After emitting three beeps to warn, the machine starts to run and enters the fully automatic working mode of external cleaning, rinsing and filling. To stop the machine, press the stop button at the filling position and on the control box to stop and turn off the main power.

　　Second, the automatic capping machine use safety rules.

　　1、Do not let people not related to the operation approach the equipment.

　　2、No foreign objects (such as tools, rags, etc.) In the equipment of the liquid filling machine.

　　3、All protectors should be safe and reliable. No foreign objects (such as scarves, bracelets, watches, etc.) may be stuck by moving parts.

　　4、No abnormal noise is allowed (if so, stop immediately to check the cause).